Carburetors and Kits
Jets And Emulsion Tubes
Jets are sized in "milimeters", so a "50" jet is very close to .5mm. Actually they are rated on f...
Jets are sized in "milimeters", so a "50" jet is very close to .5mm. Actually they are rated on flow not size, after they are measured on a flow machine. That's why drilling and reaming jets is not necessarily a good idea, since drilling or reaming can result in a 55 idle flowing more than a 60 idle, based on orifice length and entry/exit radius, etc.
$4.24 – $4.24 11 variants
Manifolds
30-34 Pict Intake Manifold Center Section
This manifold allows for the use of 30 Pict-1, 31 Pict-3 or 34 Pict-3 carburetors without adapters.
This manifold allows for the use of 30 Pict-1, 31 Pict-3 or 34 Pict-3 carburetors without adapters.
$94.70 $94.95
Jets And Emulsion Tubes
Jets are sized in "milimeters", so a "50" jet is very close to .5mm. Actually they are rated on f...
Jets are sized in "milimeters", so a "50" jet is very close to .5mm. Actually they are rated on flow not size, after they are measured on a flow machine. That's why drilling and reaming jets is not necessarily a good idea, since drilling or reaming can result in a 55 idle flowing more than a 60 idle, based on orifice length and entry/exit radius, etc.
$4.24 – $4.24 19 variants
Jets And Emulsion Tubes
Jets are sized in "milimeters", so a "200" jet is very close to 2.0mm. Actually they are rated on...
Jets are sized in "milimeters", so a "200" jet is very close to 2.0mm. Actually they are rated on flow not size, after they are measured on a flow machine. That's why drilling and reaming jets is not necessarily a good idea, since drilling or reaming can result in a 180 air flowing more than a 190 air, based on orifice length and entry/exit radius, etc.
$4.24 – $4.24 22 variants
Carburetor Kits
Type 1 Dual IDF AA Carburetor Kit
This is a Brand New AA Performance Dual Carb Kit with AA Performance Linkage and Manifolds. "They...
This is a Brand New AA Performance Dual Carb Kit with AA Performance Linkage and Manifolds. "They are a copy of the Weber IDF"  Kit features dual AA carbs with Chrome Velocity Stacks, all necessary hardware, hoses, and clamps to install.AA Air cleaners features stamp steel bodies. AA Manifolds are off-set so that the position of the carburetors are straight across the engine to eliminate the body clearance problems associated with non off-set manifolds. Making them easier to install and prov...
$603.70 – $735.70 3 variants
Manifolds
Red Silicone Intake Boot Kit with Clamps
Red Silicone Intake Boot Kit with Clamps
Red Silicone Intake Boot Kit with Clamps
$11.70 $11.95
Carburetor Kits
Dual Port Single Carburetor Kit "IDF Weber Copy...
Kit Features:- New 40mm or 44mm Single Carburetor "IDF Weber Copy"- Chrome Air Cleaner with Gauze...
Kit Features:- New 40mm or 44mm Single Carburetor "IDF Weber Copy"- Chrome Air Cleaner with Gauze Element- Dual Port End Castings- Hardware and Gaskets-Carb Spec's- Venturi 28mm- Idle Jet 60- Main Jet 135- Air Corrector 160ON SOME APPLICATIONS ADDITIONAL JETTING MAY BE NECESSARY.   Engine: Air-cooled VW Type 1 Dual Port and Early Bus Dual Port  Â
$527.70 – $527.70 2 variants
Carburetors Only
VW 34 PICT-3 Carburetor Type 1 and 2 VOLKSWAGEN
NEW VW CARBURETOR AFTERMARKET REPLACEMENTBEETLE CARBURETOR34 PICT-3 12 Volt Choke Fits dual port ...
NEW VW CARBURETOR AFTERMARKET REPLACEMENTBEETLE CARBURETOR34 PICT-3 12 Volt Choke Fits dual port intake manifolds, Ghia, Bug, type 1 and 2 engines. Â
$139.70 $139.95
Air Cleaners And Stacks
AA (IDF Style) Air Cleaner Element Only
AA (IDF Style) Air Cleaner Element Only
AA (IDF Style) Air Cleaner Element Only
$12.70 $12.95
Manifolds
Type 1 Offset IDF Manifold Set
 Brand New set of type 1 Offset IDF style Manifold. AA Manifolds are off-set so that the position...
 Brand New set of type 1 Offset IDF style Manifold. AA Manifolds are off-set so that the position of the carburetors are straight across the engine to eliminate the body clearance problems associated with non off-set manifolds. Making them easier to install and provide more working area around the carburetor than other types of intake manifolds.
$91.70 $91.95
Jets And Emulsion Tubes
F7, F11, and F16
F7, F11, and F16
$15.64 – $15.64 3 variants
Carburetor Kits
Dual Port Single Carburetor Kit "IDF Weber Cop...
Kit Features:- New 40mm or 44mm Single Carburetor "IDF Weber Copy"- Chrome Air Cleaner with G...
Kit Features:- New 40mm or 44mm Single Carburetor "IDF Weber Copy"- Chrome Air Cleaner with Gauze Element- Empi Single IDF Intake Manifold - Hardware and GasketsCarb Spec's- Venturi 36mm- Idle Jet 60- Main Jet 155- Air Corrector 200ON SOME APPLICATIONS ADDITIONAL JETTING MAY BE NECESSARY.   Engine: Air-cooled VW Type 1 Dual Port and Early Bus Dual Port Â
$481.70 – $481.70 2 variants